EN
44
10-506
5.7. Mounting upper frame
▶
Position the upper frame onto the two corners of the underframe
(1)
.
▶
Secure the upper frame below by gently pushing
(2)
.
ATTENTION!
Lay the conductors in such a manner that they are
not crushed when securing the upper frames.
Image 7: Mounting upper frame
5.8. Connecting the receiver
▶
Connect the plug on the cord with the bus
(1)
. This is placed on the
base of the universal telephone (image 8).
Image 8: Connecting the receiver
5.9. Opening the device
▶
Remove the cord of the receiver from the bus (see Connecting the receiver).
▶
At the bottom of the device, there's a rectangular unlocking eyelet. Gently
push a screwdriver straight into this eyelet (image 9).
▶
Pull the upper frame loose from below
(1)
.
▶
Lift the upper frame from the two upper corners
(2)
.
Image 9: Opening the telephone