Niko 10-362, Product Information, Page: 53 / 80

53 EN
10-362
5.1.2. Connection with bus audio module 10-360, code lock module 10-363
On the bus audio module 10-360
Remove the cover from the terminals (3) .
Open the cover of the inspection opening (2) .
Connect the 4-pole connection cable to the connector in the inspection
opening.
Pass the cable below the cover plate of the module (1) and out again
towards the terminals.
Close the inspection opening and the cover of the terminals.
Connect the cable of the audio module to the display module.
Also connect the code lock module 10-363.
Connect the cable of the audio module to the display module.
Also connect the code lock module 10-363.
Initial activation
To establish a connection, the ExtU addresses of
the bell push button module and either the audio
module or the display module must be identical.
Assign the same value to the ExtU addresses of
the modules and block them.
EXT EXT a b P NO COM NC
10-363
10-361
V2
V1
M
P
b
a
10-360
a b R P M V1 V2 EXT Kamera EPROM EXT
10-362
ISP EPROM EXT EXT
4
3
2
1
10-361
10-360
10-362
10-363
Image 4: 10-35x incl. functional modules