3
Battery Installation
Battery Installation
Battery Installation
Battery Installation
Battery Installation
How to Install Batteries
Slide the stopper forward
and remove the hatch.
[Submarine]
* Avoid mixed use of old and new batteries, or
mixed use of different types of batteries.
* Make sure that the power switch of the subma-
rine is turned OFF when exchanging batteries.
Hull
Battery box
Battery compart-
ment hatch
Terminal side
Terminal (metal part)
(1) Make sure that the power switch is turned OFF.
(2) As shown in the diagram, slide the stopper forward and remove the battery compartment
hatch by turning in the clockwise direction (looking at the submarine from the rear).
(3) Remove the battery box from the hull.
Install 3 size-AA alkaline batteries. Make sure that The + and - poles are positioned prop-
erly.
(4) Put the battery box back into the hull from the terminal side first, with the terminal (metal
part) on top.
(5) Replace the battery compartment hatch. Turn the hatch in the counterclockwise direction.
* Fit the hatch in firmly and screw in tightly so that water will not seep into the battery compart-
ment.
(Be careful so that the battery box is replaced in the right direction. The box is designed so
that it will not fit in the wrong direction. Don't jam the box in by force.)
[Transmitter]
(1) Use a + screwdriver to remove the screw attaching the battery lid.
(2) Slide the lid to the side and remove.
(3) Install the battery, making sure that the + and - poles are positioned
properly.
(4) Replace the battery compartment lid and screw in.
(The screwdriver is not included in the kit.)
6F22(9V) dry cell battery
(You cannot obtain complete water-tightness
unless the screws are firmly attached.)
