1.5V
1.5V
1.5V
3
3
2
ON
OFF
4
6
1
2
3
5
1
TRANSMITTER BATTERY INSTALLATION
VEHICLE BATTERY INSTALLATION
5
1.
2.
3.
To remove battery lid, loosen screw to open.
Slide open the battery lid in the direction as
shown in the figure, while lightly pressing its
center.
Insert 1.5V (AAA/LR03) batteres x3 with the
polarity (+/-) as shown on the bottom of
battery compartment.
Replace the battery lid, following the removal
procedure in reverse.
There is no on/off switch on the Transmitter. Moving the sticks turns it on automatically.
Fully charge 6.0V NiMH battery
pack in advance of your use.
Turning off vehicle.
Turn the latches located underneath
of vehicle to unlock battery lid as
shown in the figure with arrows.
Loosen screw to open battery lid.
Remove battery lid.
Insert 6.0V battery pack into battery
compartment with correct polarity
(+/-). Place battery lid back in
position and lock properly
1.
2.
3.
4.
5.
6.
NOTE:
For best performance, always use alkaline batteries only. To remove the batteries, reverse the
installation procedure.
THIS PRODUCT SHOULD BE USED WITH ADULT SUPERVISION.
NOTE:
To remove the batteries, reverse the installation procedure.
