Nikkei NU5818S, User Manual

Page: 17 / 31

VI - Antenna Connections
EN-16
We recommend you use a 75
Ω
antenna cable so as to eliminate the disturbance
caused by impedance mismatching. The antenna cable shall not be bundled
together with the power cord.
Directly insert the 75
Ω
antenna cable plug into the antenna socket when applying
cable television.
Note: The antenna should be checked periodically.If clear image is not available,
shut down the power and then carefully check the antenna.
Power-on/Power-off
1.Make sure all cables are disconnected from the main unit before connecting to the AC
power source.
2.Read the instructions carefully before connecting other devices.
Press the standby button again on the remote control for the television the indicating
lamp becomes green, and then television image is available.
Press the standby button onthe remote controller or the television to enter into
standby state.
Power-saving & protection mode
1.In video or PC state, the television will enter into lower power sleep state (standby state)
to conduct power saving and protection after several minutes with no signal inputs.