Nikkei NH3214, User Manual

Page: 25 / 96

1
.
Press the "MENU" button on the remote control to enter the OSD menu,then press " "
button to select the "Picture" menu.
2. Press the "OK" button to enter the "Picture"menu setting ,use " / " to move the
menu bar,and then press " / " button to adjust the value of selected item.
3. Press "MENU" button to return to upper menu
.
Picture Mode
Availble options: Personal,Mild,Standrd, Dynamic.
Contrast
The contrast value of picture can be adjusted from 0-100.
Brightness
The brightness value of picture can be adjusted from 0-100.
Colour
The colour saturation value of picture can be adjusted from 0-100.
Tint
This item is used to adjust the tone of color in NTSC system from 0-100.
Sharpness
The sharpness value of picture can be adjusted from 0-10.
NOTE: The value of Brightness, Contrast, Color, and Sharpness is adjustable only in User
picture mode.
Colour Temp
This item is used to adjust the optimum colour temperature for suitable viewing.
Available options: Normal, Cold, Warm
Noise Reduction
This item is used to eliminate the image noise to gain better image effect.
Available options: Off, Low, Medium, High.
SCREEN
setup the PC.
Pynamic CR
Dynamic Contrast ON
/
OFF.
Face Color
Adjust this option if face color displayed on screen looks a little abnormal.
Available value: -50, -40, -30, -20, -10, 0,10, 20, 30, 40, 50.
EN-24
Picture