6
Keep the appliance housing's rubber seal clean. A single hair or grain
of sand can cause a leak and damage your camera.
1
After every use in salt water, rinse the outside of the camera housing
with non-salt water and dry. Not doing this can eventually cause
corrosion of the hinge pin and salt buildup in the seal, which can
damage the camera housing.
1
The camera contains sensitive components, including the battery.
1
Avoid exposing your camera and battery to very cold or very hot
1
temperatures. Low or high temperature conditions may temporarily
1
shorten the battery life or cause the camera to temporarily stop
working properly. Avoid dramatic changes in temperature or
humidity when using the camera, as condensation may form on or
within the camera.
1
Do not dry the camera or battery with an external heat source such
as a microwave oven or hair dryer.
Remarks
5
If this appliance is equipped with rubber feet to prevent it from
moving: The feet are made from non-migrating material specially
formulated to avoid leaving any marks or stains on furniture.
However, certain types of furniture polishes, wood preservatives
or cleaning sprays cause the rubber to soften and leave marks or a
residue on the furniture, and potentially risk the surface to become
damaged. To prevent damage to wooden surfaces, we recommend
that you apply self-adhesive pads to the bottom of the rubber feet
before installation.
5
We recommend that you retain the original carton and packing
materials in case it ever becomes necessary to return your product
for service. This is the only way to safely protect the product
against damage in transit. If you do dispose of the carton and the
packing materials, please remember to recycle with due care to the
environment.
