19
3.2 Installation and Removal of Blade
Thoroughly read “1.2 General Precautions” before installing and removing the blade.
3.2.1 Installation of Blade
Put on gloves.
Put the blade guard [1]
,
the blade [2]
and the blade cap [3]
on the output
shaft [4].
Insert the L type wrench [5] into the
groove [6] for fixing gear case and
rotate the blade mounting bolt [7]
counterclockwise to tighten.
Blade mounting bolt tightening torque:
16.7 to 19.6 Nm
Note
●
The directions for loosening/tightening the
blade mounting bolt [7] are opposite to the
ones of general nuts.
3.2.2 Removal of Blade
Wear gloves, and remove the blade in the opposite way of the installation of the blade.
[3]
[2]
[1]
[4]
[6]
[5]
[7]
A
1
2
3
Summary of Contents for SSET
Page 38: ...38 MEMO...