2
3
Overview
Specifications
Transducer:
Electret condenser
Polar pattern:
Omni directional
Frequency range:
50 Hz to 20 kHz
Sensitivity:
-40 db ± 3dB
Signal-to-noise ratio:
75 dB
Maximum input level:
135 dB SPL (at 1 kHz)
Output impedance:
2.2 kΩ
Connector:
3.5 mm (1/8") gold plated TRRS
Battery life:
Up to 130 hrs (CR1220)
Audio Cable:
6 m
Dimensions:
17x53 mm
ENGLISH
ENGLISH
Included
Windshields, lavalier microphone, 2x cotton wind muff, collar clip, storage hard case,
CR1220 battery, manual.
Use
Open the battery compartment by unscrewing and sliding the lid along the cable. Insert
the included CR1220 battery into the battery compartment. Mind the polarity of the
battery. Close the battery compartment by screwing the lid back on.
Connect the microphone to your device. The microphone automatically detects and
adapts if your device uses TRRS (4-pole) or TRS (3-pole) connectors.
The LED indicator is green when the microphone is connected to a device and has
sufficient battery power. If the LED indicator does not turn on check the battery status.
Note! The integrated camera app for Android devices does not support external
microphones. Use a different camera app.
4-pole 3.5 mm
(1/8") TRRS
connector
LED indicator
Battery
compartment
Microphone
Collar clip
Summary of Contents for 24221
Page 5: ......
