①
Spindle ······························· Movement displayed on Gauge.
②
Anvil ··································· Workpiece is held between this
and the Spindle.
③
Anvil Feed Screw ··············· For adjusting Spindle position.
④
Anvil Lock Screw (rear) ······ Fixes Anvil position.
⑤
Gauge Mounting Hole ········ Mount your Gauge here
(8mm Stem).
⑥
Gauge Clamp Screw (rear) ······ Tighten to secure Gauge.
⑦
Measurement Lever ················· Press Lever to move Spindle.
⑧
Work Stop ······························· Guide for positioning cylindrical
workpieces for measurement.
⑨
Work Stop Clamp Screw (rear) ··· Fixes Stop position.
⑩
Stand Mounting Hole ················ Mounting hole for attaching to
Stand.
WORKPIECE
Always follow the procedures specified in order to prevent harm
to yourself or others, and to prevent damage to property.
Denotes a prohibition
– You MUST NOT do
Denotes a requirement
– You MUST do
Read the manual and follow all instructions.
・
Use of product other than as described in the manual
may cause accident.
Use only for measuring.
・
Use for any purpose other than measuring may cause
damage or wear to the instrument. Improper use may
also cause accident.
Handle with Care.
・
Do not drop or subject instrument to excessive shock.
Do not place under heavy objects. Improper handling
may cause damage or poor accuracy.
・
Do not scratch instrument.
Press on Lever Gently
・
Rough handling may cause damage or affect accuracy.
Use and store only in the following conditions:
● Dry location protected from rain, water, and oils.
● Protected from direct sunlight.
● Location that does not become hot.
● Location protected from use by children and
unauthorized people.
・
Use in conditions other than indicated above may
result in poor accuracy, damage to product, or cause
accidents or injury.
Do not disassemble or modify.
・
Doing so may cause accident or injury. Please contact
distributor or place of purchase for service.
After use, treat with rust preventive and store in dry
location protected from direct sunlight.
・
Spindle and Anvil require rust preventive after use to
insure smooth operation.
S-LINE SNAP GAUGE
In this manual, indicates RISK OF PERSONAL INJURY
OR PROPERTY DAMAGE if not followed. The symbol
indicates something which is PROHIBITED, and the
symbol indicates REQUIRED step or necessary condition
.
ALD-＊＊＊
Model No.
Instruction Manual
Thank you for purchasing the S-Line Snap Gauge. Mount a digital micrometer or indicator to this precision gauge holder for precise hand
held measurements of part dimensions.
● For safe and proper use of this product, please read this instruction manual
before use and follow the procedures described. Please keep manual where
it is accessible to user for future reference.
● Keep this manual with the instrument if transferred or leased to a third party.
● For inquiries about this product, please contact dealer or Niigata Seiki at
the address listed on the following page.
SAFETY NOTIFICATIONS
PROFESSIONAL
①
Spindle
②
Anvil
③
Anvil Feed Screw
④
Anvil Lock Screw (rear)
⑧
Work Stop
Material must not be easily deformed.
※
Depending on size and thickness, soft material such as aluminum or
plastic may deform and measurement will be in error.
Make sure the part being measured is appropriate.
Use on parts which are not rigid may cause deformation during
measurement or damage to workpiece.
■
PART IDENTIFICATION, FUNCTION
※
Model ALD-080 shown
Precision
Measuring
Tool
⑤
Gauge mounting Hole
⑥
Gauge Clamp Screw
(rear)
⑦
Measurement
Lever
⑨
Work Stop Clamp Screw (rear)
⑩
Stand Mounting
Hole
CAUTION
Items where there is potential of injury or
property damage.
Please
Observe
SAFETY PRECAUTIONS
