5.
Mounting The Charging Base
The Hawk-Star is supplied with a charging base,
providing a convenient way to charge it. The base
can be used flat on a desk, or fixed on a wall or a
vehicle. The charging base has four mounting holes,
measurements are shown in Fig 1. Make sure the M5
fixings screws used to mount the charging base, are
strong enough to support the weight of the Hawk-Star.
Take care not to over tighten the fixings and mount on
a flat/level surface, so the charge base isn’t distorted
or damaged.
74mm
137mm
31mm
42mm
105mm
194mm
NightSearcher Search Light
INSTALLATION DETAILS
DIRECTION OF TRAVEL
OF VEHICLE
MOUNT USING FOUR M5 FIXING SCREWS
HOLDER MAY BE MOUNTED
ON EITHER A HORIZONTAL
OF VERTICAL PANEL
74mm
137mm
31mm
42mm
105mm
194mm
NightSear
cher Sear
ch Light
INST
ALLA
TION DET
AILS
DIRECTION OF TRA
VEL
OF VEHICLE
MOUNT USING FOUR M5 FIXING SCREWS
HOLDER MA
Y BE MOUNTED
ON EITHER A HORIZONT
AL
OF VER
TICAL P
ANEL
74mm
137mm
31mm
42mm
105mm
194mm
NightSear
cher Sear
ch Light
INST
ALLA
TION DET
AILS
DIRECTION OF TRA
VEL
OF VEHICLE
MOUNT USING FOUR M5 FIXING SCREWS
HOLDER MA
Y BE MOUNTED
ON EITHER A HORIZONT
AL
OF VER
TICAL P
ANEL
Holder may be mounted on either a
horizontal or vertical panels.
Fig 1.
Attaching Shoulder Strap
A optional shoulder strap is available to
buy, making it comfortable to carry the
searchlight, whilst keeping your hands
free to perform other tasks. See
Fig 2
.
showing the fitting and removing of the
strap.
Fig 2.