ProAxis
plus
™ Electric Profiling Bed and Pressure Area Care System
Instruction for use and trouble shooting guide
________________________________________________________________________________
ProAxis Plus Operating Instructions 3.1 Dated 18/05/11 15/24
Smart Settings
Set the number of
steps between the
accepted angles
1 - 10
Once desired
number is
achieved press
ACCEPT key
Set the number of
minutes between
steps
1 - 60
Once desired
number is
achieved press
ACCEPT key
CONFIRM the
settings, and if
correct press
ACCEPT key
If the settings are
wrong, press the
REJECT key and
start again
Smart Settings
From the Home
Screen press
SMART key
Set backrest LOW
position using UP /
DOWN keys
0 – 45 deg.
Once desired
angle is achieved
press ACCEPT
key
Set backrest HIGH
position using UP /
DOWN keys
15 – 60 deg.
Once desired
angle is achieved
press ACCEPT
key
If settings
displayed are
correct press
ACCEPT
If settings are
incorrect press
REJECT and
follow guide below
Screen turns
green and system
is working. Time to
next movement is
displayed.
Press EXIT key to
stop at any time.
