22
7
22
7
Adjustable Features
(continued)
Time selections are 1,2,3,4,5,10,15,20,30,45 minutes and OFF.
The OFF setting disables the auto-off power down feature.
To save the setting, remember to push the 3-way switch up after selection.
The infrared and operating power-down timers are set separately. If the IR auto-off
time is less than the main time, the IR will shut off first, and the device will then
power off after the main time has elapsed.
11. Reset Feature
The “Reset” feature allows the user to restore all factory defaults in the device, with
the exception that the “IR Start” setting is not changed. The actual IR state will
remain at whatever it is set to be, just as if the power was turned off and back on.
Daytime Use
To use in daylight conditions, leave the lens cap attached and operate at low gain settings.
Tripod Adaptor
The tripod fitting is located on the underside of the device, and fits to all standard tripod
mounts with a fitting size of 1/4 - 20.
Tripod mount is recommended for exposures of less than 10fps for image stabilization.
Adjustable Features
(continued)
Time selections are 1,2,3,4,5,10,15,20,30,45 minutes and OFF.
The OFF setting disables the auto-off power down feature.
To save the setting, remember to push the 3-way switch up after selection.
The infrared and operating power-down timers are set separately. If the IR auto-off
time is less than the main time, the IR will shut off first, and the device will then
power off after the main time has elapsed.
11. Reset Feature
The “Reset” feature allows the user to restore all factory defaults in the device, with
the exception that the “IR Start” setting is not changed. The actual IR state will
remain at whatever it is set to be, just as if the power was turned off and back on.
Daytime Use
To use in daylight conditions, leave the lens cap attached and operate at low gain settings.
Tripod Adaptor
The tripod fitting is located on the underside of the device, and fits to all standard tripod
mounts with a fitting size of 1/4 - 20.
Tripod mount is recommended for exposures of less than 10fps for image stabilization.
Batteries
Requires 4 AA alkaline batteries
(not included)
Typical battery life from one set of batteries is up to 7.6 hours in continuous use, or up to 2.8
hours in continuous use with the infrared emitter at maximum intensity.
To improve battery life, reduce brightness or program the auto-off feature to cause the device
to automatically shut down after specified intervals.
DO NOT MIX OLD AND NEW BATTERIES
Package contents:
1. Case
2. iGen
®
3. Manual
Batteries
Requires 4 AA alkaline batteries
(not included)
Typical battery life from one set of batteries is up to 7.6 hours in continuous use, or up to 2.8
hours in continuous use with the infrared emitter at maximum intensity.
To improve battery life, reduce brightness or program the auto-off feature to cause the device
to automatically shut down after specified intervals.
DO NOT MIX OLD AND NEW BATTERIES
Package contents:
1. Case
2. iGen
®
3. Manual
