background image

Driving Controls

1.  Check proposed route for possible hazards, obstructions, and personnel.

2.  Push green power button.

3.  Use Drive Speed selector on the basket control station to determine speed.

  

High Drive

 (Hare) - GIVES HIGH SPEED AND LOW GRADEABILITY

  

Low Drive

 (Tortoise) - GIVES LOW SPEED AND HIGH GRADEABILITY

  

N.B. High Drive

 is only available when the booms are in the stowed position.

4.  Select drive joy stick from the basket control box.
  

A. Up for 

FORWARD

   

B. Down for 

REVERSE

   

C. Left for 

STEER LEFT

   

D. Right for 

STEER RIGHT

5.  All control levers give a fully proportional response therefore the more the lever is moved away from 

  the center (

OFF

) position the faster the function will become.

6.  Maximum speed is only attainable when all booms are fully stowed and the 

HIGH/LO

 selector is in the  

 

HIGH

 

position.

7.  When driving with the booms fully stowed, the Tilt Alarm is bypassed to allow the Niftylift to be driven  

  in areas where the slope exceeds the five-degree working limit. In normal operation the drive is 

  therefore unaffected when driven onto a slope in excess of five-degrees, until the booms are raised,  

  whereupon the drive would be disabled and the lift alarm sounds continuously.

8.  Under no circumstances should any Niftylift SP series be driven on slopes exceeding 25%, with    

  booms fully stowed.

ALL NIFTYLIFTS ARE FITTED WITH A TILT ALARM - PRE-SET IN THE FACTORY. 

ONCE ALARM IS ACTIVATED, THE NIFTYLIFT WILL LOSE ALL POWER TO DRIVE 

FUNCTIONS AND A LOUD AUDIBLE ALARM WILL SOUND. 

TO DEACTIVATE, LOWER THE BOOMS FULLY TO STOWED POSITION AND 

REPOSITION BASE ON FIRM LEVEL GROUND.

IF ALARM SOUNDS - DESCEND IMMEDIATELY AND RE-LEVEL MACHINE BASE.

Disclaimer:

These instructions are intended as a helpful 

reminder. They do not replace the full operating 

instructions found in the owners manual, which 

is available at the rental counter.

A to Z Equipment Rentals & Sales - 4 locations in the Phoenix Arizona Metro Area

If you like this piece of equipment,  inquire about purchasing it !

If equipment does not work properly, notify office at once - 

• Phoenix, 602-955-5100  • North Valley, 602-992-1150 • East Valley, 480-539-8700 • West Valley, 623-925-0200

Reviews: