TrackDrive (TD) Series
Operating & Safety Instructions
English/USA – 02/17
8
2.1.8
Never exceed the maximum platform capacity, as indicated on the decals and machine serial plate.
2.1.9
Only operate the Niftylift on a firm level surface.
2.1.10
Never position any part of the Niftylift inside the
Minimum
approach
distances
(MAD) to above-
ground electrical conductors as listed in the table below. (Reference ISO 18893:2014).
Voltage range (kV)
MAD (m)
<0.7
1
≥0.7 to 7
1.2
>7 to 50
3
>50 to 220
4
>220 to 500
5
>500 to 750
10
>750 to 1000
13
>1000 to 1250
16
THIS MACHINE IS NOT INSULATED.
If in doubt, contact the local appropriate governing authority.
2.1.11
On entering the platform, ensure that the drop down entry bar is closed afterwards.
2.1.12
Use of an approved safety belt and lanyard, hardhat and appropriate safety clothing is mandatory.
Fasten harness to designated harness securing points within the platform and do not remove until
leaving the platform whilst in the stowed position.
2.1.13
Always remain standing within the platform. Do not attempt to increase your
height or reach by standing and/or climbing on the platform guardrails or any
other object.
KEEP YOUR FEET ON THE PLATFORM FLOOR
. Do not sit, stand
or climb on the guardrail, mid rail or boom linkage. Use of planks, ladders or
any other devices on the Niftylift for achieving additional height or reach shall
be prohibited.
2.1.14
Do not use the platform levelling system to artificially increase the outreach of the platform. Never use
boards or ladders in the platform to achieve the same result.
2.1.15
Do not use the platform to lift overhanging or bulky items that may exceed the maximum capacity or
carry objects that may increase the wind loading on the platform. (e.g. Notice boards etc.)
2.1.16
The Niftylift shall not be operated from a position on trucks, trailers, railway cars, floating vessels,
scaffolds or similar equipment unless Niftylift Ltd in Great Britain approves the application in writing.
2.1.17
Always check the area below and around the platform before lowering or slewing to ensure that it is
clear of personnel and obstructions. Care should be taken when slewing out into areas where there
may be passing traffic. Use barriers to control traffic flow or prevent access to the machine.
Summary of Contents for TrackDrive TD120T Series
Page 2: ......
Page 19: ...TrackDrive TD Series Operating Safety Instructions English USA 02 17 17...
Page 55: ......
