3.7. Water piping system.
The water piping system includes : – one tank (container) with capacity of 10 litres
– an electric driven water pump
– a water valve
– a water valve, actuated with pedal
The tank is located inside the cupboard. The pedal valve is located over the left wheel. Before a long
time still stand or before cold season empty the water tank and water piping completely. There is
special space inside the gas bottle compartment, designed for two water tanks. Before caravan
departure, fasten the water tanks protecting them against suddenly and unnecessary movements.
Put down a container under waste water drain.
3.8.Tyres.
Size : 155 R 13
Pressure : dead/under load = 160 / 190 kPa
To ensure a long time tyres us :
– check air pressure regularly
– don't brake suddenly without serious reason
– even with a short time the caravan using, support up with folded supporting legs
– during the cold season support up the caravan with legs and reduce the air pressure
For a wheel removing, support up the caravan with the rear supporting legs and drop the pulling shalt
of the vehicle on the ground surface. Loose the wheel fastening bolts. Lift de pulling shaft together
with entire caravan, using its small support wheel, designed for this purpose, until you reach free
rotation of the travelling wheels. Unscrew the wheel fastening bolts and remove the wheel. Fasten
the wheel again in reverse sequence.
4. The caravan to use.
4.1. Load arrangement and protection.
The load, located inside the caravan living space should be arranged uniformly to reach uniform both
wheels loading. Safe and protect the heavy and fragile things against suddenly displacements during
caravan towing. Position in front of rear within the caravan cabin any extremely heavy load is not
allowed. These load should be positioned over the axle. Look on fig. 8 : the last position is allowed.
Figure 8 :
