CGT1050
–
GT1060
CO
2
/TEMP/RH METER
_____________________________________________________________________________________________
OPERATION
Press
to turn the instrument on and off. At power up, it emits a short beep and performs
30 seconds countdown (Fig.2) for instrument warm up, then enters normal mode with current
CO
2
, temperatures, and humidity(GT1060 RH) readings displayed (Fig.3).
Model GT1050 Model GT1060 RH
The meter starts measurement when power on and update readings every second. In the
condition of operating environment change (ex. from high to low temp.), it takes 30 sec to
respond for CO
2
sensor and 30 minutes for RH.
NOTE:
Do not hold the meter close to faces in case exhalation affects CO
2
levels.
AIR (all models), DP, WBT (GT1060 RH)
Press
to switch temperatures display. The lower left display will cycle from air
temperature, dew point. (Fig.4), and wet bulb temp. (Fig.5)
Press
to freeze the readings, "HOLD” icon is displayed on the left top of LCD
(Fig.6). All
current readings are kept unchanged, except STEL and
TWA. Press
again to cancel the hold function.
Summary of Contents for GT1050
Page 1: ...USER MANUAL GT1050 GT1060 CO2 TEMP RH METER ...
Page 12: ......