78
OPERATING PROCEDURE: Memory Data Management
3.10.2 Printing all saved data
All measured data saved in the main body is printed.
By the
parameter, printing only (PRINT), data output only (OUT-
PUT), or both (BOTH) can be selected.
When “PRINT” is selected, even if the
parameter is set to “YES”, the
data is not output to the refractor.
1
Display the MEMORY DATA MANAGE-
MENT screen.
1)
Press
to display page
.
2)
Press
to display the MEMORY DATA
MANAGEMENT screen.
2
Select “ALL PRINT” with
or
button
and press
.
The message “PRINT ALL SAVED DATA” appears.
3
Print all the saved data.
Select “YES” with
or
button and press
to print all data indicated by “4/50” used as an
example in the figure for Step 2.
In this example, “4/50” represents “The number of
sent data / The number of saved data”.
• Printing of all saved data is not possible for infrared communication. Select each data one by one for
printing.
• All saved data (4/50 shown in the example above) is output according to the current settings for CYL
mode, vertex distance, and such.
