§5
“CR” (CARRIAGE RETURN) CODE
When the personal computer is used as the external computer for receiving the data, it may be
necessary to insert “CR” code into the end of transmitting data for one line. It is possible for ARK-
710A to insert “CR” code into the end of the data or not. (Refer to 3) of the section 6 )
The transmitting data are as follows when “CR” code is inserted.
1) RS command with “CR” code
“CR” code is inserted into the end of data.
2) Data with “CR” code (When “I/F Mode” is set to NIDEK)
Data
“CR” code is inserted into both positions after the “ETB” code and the end of data.
3) Data with “CR” code (When “I/F Mode” is set to NCP10)
Checksum
“CR” code is inserted into both positions after the “ETB” code and the end of data.
Data
Data
Data
Data
Data
