Back Light Setting
The LCD display of the ST-329 stroboscope has a backlight that
can be turned on or off in the parameter settings. To adjust the
backlight setting, enter parameter mode and use the “SET” key to
cycle to LCD setting. Press “+” key to turn on the backlight. Press
“-” key to turn off the backlight.
Note: If the backlight is set to on, as a power saving feature, it will
automatically shut off after the set minutes if no keypad or dial
operation has occurred. The LCD backlight will turn back on with
keypad or dial operation.
Automatic Power-Saving Settings
LCD Back Light Off: If the backlight is set to on, as a power
saving feature, it can be adjusted to automatically shut off from
1 to 1000 seconds, if no keypad or dial operation has occurred.
The LCD backlight will turn back on with keypad or dial oper-
ation.
Factory Reset (Initial)
To reset unit to factory values choose “Yes” under Initial in the
parameter setting mode. Then press “SET”.
Model
Length
# LED
Groups
# LED’s
ST-329-0
9.25” (235 mm)
2
18
ST-329-1
20” (500 mm)
3
27
ST-329-2
24” (600 mm)
4
36
ST-329-3
31” (800 mm)
6
54
ST-329-4
39” (1000 mm)
7
63
ST-329-5
39” (1000 mm)
8
72
ST-329-6
47” (1200 mm)
9
81
ST-329-7
47” (1200 mm)
10
90
ST-329-8
63” (1600 mm)
11
99
ST-329-9
65” (1650 mm)
12
108
Dimension Chart & Light Arrangement