18
SI-INTERBUS User Guide
Issue Number: 1
Figure 5-1 Remote bus IN
Figure 5-2 Remote bus OUT
A suitable cable is provided to connect a standard Interbus 9 pin ‘D’ male connector to
the RJ45 port and can be purchased separately from Control Techniques using the part
number 9500-1067.
Figure 5-3 Remote bus OUT adapter
The terms ‘Input’ and ‘Output’ in the table above refer to the data direction with regards
to the PLC.
‘Input’ refers to the data from a slave device (e.g. SI-Interbus) to the PLC.
‘Output’ refers to the data from the PLC to a slave device (e.g. SI-Interbus).
NOTE
NOTE
