34
Digitax HD M753 Control User Guide
Issue Number: 3
Table 5-4 Active action icon
5.2
KI-Remote Keypad operation
5.2.1
Control buttons
The keypad consists of:
•
Navigation Keys - Used to navigate the parameter structure and
change parameter values.
•
Enter / Mode button - Used to toggle between parameter edit and
view mode.
•
Escape / Exit button - Used to exit from parameter edit or view
mode. In parameter edit mode, if parameter values are edited and
the exit button pressed the parameter value will be restored to the
value it had on entry to edit mode.
•
Start forward button - Use to provide a 'Run' command if keypad
mode is selected.
•
Start reverse button - Used to control the drive if keypad mode is
selected and the reverse button is activated. If
Enable Auxiliary Key
(06.013) = 1, then the keypad reference is toggled between run
forward and run reverse each time the button is pressed. If
Enable
Auxiliary Key
(06.013) = 2, then the button functions as a run
reverse key.
•
Stop / Reset button - Used to reset the drive. In keypad mode can be
used for 'Stop'.
Low battery voltage is indicated by
low battery symbol on the keypad
display.
Figure 5-3 overleaf shows an example on moving between menus and
editing parameters.
Active action icon
Description
Row
(1=top)
Priority
in row
Accessing non-volatile
media card
1
1
Alarm active
1
2
Keypad real-time clock
battery low
1
3
or
Drive security active and
locked or unlocked
1
4
Motor map 2 active
2
1
User program running
3
1
Keypad reference active
4
1
No entry - read only
parameter cannot be
edited
1
1
NOTE
Summary of Contents for Digitax HD M753 EtherCAT
Page 261: ......
Page 262: ...0478 0461 03...