5-
On this mode ,this light will be synchronization response the program effect with the master
light which hang over on the master line : Master running mode : Built-in program mode, Auto
run mode, Sound active mode: 1, Sound active mode , Brightness control mode.
Break the main light, this light will be automatic quench.
3.6 DMX mode
Press MODE button. Enter DMX control mode
“d--.”.
Press SETUP button. Enter setup DMX
address menu
“×××.”
. Press UP or DOWN button. Set up the DMX address
“001.
～
512.”
.
CH1
CH2
CH3
CH4
CH5
CH6
CH7
Value
Function
DIM 1
FLASH 1
DIM
2
FLASH 2
DIM
3
FLASH 3
0-34
Dimmer & Flash
DIM
FLASH
No use
35-69
Dimmer & Flash
SPEED
No use
70-104
Pr01
105-139
Pr02
140-174
Pr03
175-209
Pr04
No use
210-244
Sound1
245-255
Sound2
3.7 Brightness control
Press MODE button. Enter brightness control menu
“CON”
. Press SETUP button, Enter
brightness control men
“×××”
.Press UP or DOWN button. Set
up brightness value “000
～
255”. Press SETUP button. Enter brightness control mode strobe flash setup menu
“FS.×”
.
Press UP or DOWN button. S
etup flash value “FS.0
～
FS.9”
PS
When power supply display software version “v ×.×”,,display time is 2 seconds .
Within 20 seconds there is no touch with any button, LED display will be closed.
