16
Input Voltage
：
：
：
：
AC
230V 50Hz
Power consumption
：
34W
LED:
2 x 10W Tri-color LEDs 30000hrs rated
Dimension
：
：
：
：
296 x 271 x 140 mm
Weight
：
：
：
：
3.8kgs
3. Installation
The unit should be mounted via its screw holes on
the bracket. Always ensure that the unit is firmly fixed
to avoid vibration and slipping while operating.
Always ensure that the structure to which you are
attaching the unit is secure and is able to support a
weight of 10 times of the unit’s weight. Also always
use a safety cable that can hold 12 times of the
weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out
of the touch of people and has no one pass by or under it.
4. How to set the unit
4.1 Main Function
To select any functions, press
MENU
button until the required one is shown on the display.
Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button
to change the mode. Once the required mode has been selected, press
ENTER
button to
setup or it will automatically return to the main functions without any change after idling 10
seconds. Back to the functions without any change press
MENU
button.
The main functions are shown below:
17
DMX 512 Address Setting
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX 512
address. Once the address has been selected, press
ENTER
button to setup or
automatically exit menu mode without any change after 10 seconds. Back to the previous
functions without any change press
MENU
button.
Channel Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(1 channel) or
(3 channels
) mode.
Once select, press the
ENTER
button to setup or automatically exit menu mode
without any change after 10 seconds. To go back to the functions without any change press
the
MENU
button
Slave Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(master) or
(slave 1) or
(Slave 2) mode.
Once select, press the
ENTER
button to setup or automatically
