10-
Thank you for using our products. For the sake of safety and better operation of this product,
please read this manual carefully before using and operating it.
6. GENERAL INSTRUCTIONS
a. UNPACKING
Thank you for purchasing this product. Please read the user guide for safety and
operations information before using the product. They contain important information
about the security of the facility and on the use and maintenance of equipment.
Keep this manual for future reference. In case of sale of equipment to another user, it is
important that this manual is attached to the equipment to the new user has the necessary
information to use and can read the warnings on safety.
It is essential that the user duly follows the safety instructions and warnings
mentioned in that user manual. The dealer won’t be able be responsible for the
defaults or any other problems due to the mishandling from the user and the non
following of the instructions included in that user manual.
This product is suitable for creating perfect laser programs and high-quality laser effects.
This unit is designed to produce decorative effect lighting and is used in light show systems.
This product is a so-called show laser emitting radiation with a wavelength spectrum and
producing lasers for shows. Please refer to the safety instructions specific for lasers.
Before any first use, unpack the set and make sure there was no damage during
transport.
Check for missing any part supplied with the laser:
-1 x SKY 250 RB
-1 x POWER CABLE
-1 x USER MANUAL
b. GENERAL SAFETY INSTRUCTIONS
This fixture must be earthed to in order to comply with the safety regulations
and to avoid any electrical shock.
Before using, please be assure that the voltage is appropriate with the
information mentioned at the rear panel of the unit. To avoid any shock hazard, do not open
or remove the cover.
This unit is designed for indoors use. Do not expose the unit to rain or moisture.
The working temperature of the unit is from 18 to 30°C. Do not use it at higher temperature.
Do not switch on and off many times to avoid reducing the life duration of the fixture.
