7.
Manuel Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display
will blink. Use
DOWN
and
UP
button to choose the red, green, blue or white mode. Once the mode has been selected, press
the
ENTER
button to setup or automatically return to the main functions without any change after 1 minute. To go back to the
functions without any change press the
MENU
button again.
8.
AUTO-TEST
Self-Test
Press the
MENU
button up to when the
is blinking on the display. Pressing the
ENTER
button and the unit will run the
built-in programmer for self-test. To go back to the functions press the
MENU
button.
9.
Use of machine time
Fixture Hours
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
button and the display will show the
number of working hours of the unit. To go back to the functions press the
MENU
button.
10.
Temperature
Select the Tenp menu, press the ENTER key to determine. You can see the machine light board temperature/degree.
Not to make any changes, wait a minute to automatically exit the menu and save. The main menu, please press the MENU
button.
DMX512 Connections
The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels.
Termination reduces signal errors and avoids signal transmission problems and interference. It is always advisable to connect a
DMX terminal. (Resistance 120 ohm 1 / 4W) between pin2 (DMX-) and pin3 (DMX+) of the last fixture.
Summary of Contents for PAR LED 188 FCB II
Page 1: ...PAR LED 188 FCB II NOTICE D UTILISATION...
Page 4: ...MENU...
Page 8: ...PAR LED 188 FCB II USER GUIDE...
Page 11: ...MENU...
