24-
DMX Address
Press the
MENU
button up to when the DMX Address is showing on the display. Press
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512
address. Once the address has been selected, press the
ENTER
button to store. Back to
the main functions without any change press the
MENU
button (or wait for 8 seconds to exit
menu mode).
Channel Mode
Press the
MENU
button up to when the Channel Mode is showing on the display. Press
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the 4, 7, 8 , 11,
16 or 19 channels mode. Once selected, press the
ENTER
button to store. Back to the main
functions without any change press the
MENU
button or wait for 8 seconds.
Show Mode
Press the
MENU
button up to when the Show Mode is showing on the display. Press
ENTER
button, the display will blink. Press
DOWN
and
UP
button to select Show 0 (Auto
show), Show 1 or … or Show 8 or Auto Fade, once selected, press
MENU
button to store
and back to the last menu, then the unit will run to music. If you choose Show 1-8 or Auto
Fade, press the
ENTER
button to confirm, then you can press
DOWN
and
UP
button to
select Speed 1 (slow speed) or Speed 2 (middle speed) or Speed 3 (fast speed), press
ENTER
button to store, the unit will run in the speed that selected. Back to the main
functions without any change press the
MENU
button or wait for 8 seconds.
Color Mode
Press the
MENU
button up to when the Color Mode is showing on the display. Press
ENTER
button, the display will blink. Press
DOWN
and
UP
button to select Manu (manual
setting), Color 1 or … or Color 32, once selected, press
MENU
button to store. If you
choose Maun, press the
ENTER
button to confirm, you can press
DOWN
and
UP
button to
select Red or Green or Blue or White/Amber, press
ENTER
button to confirm and press
DOWN
and
UP
button to adjust the value, then press
ENTER
button to store. Back to the
main functions without any change press the
MENU
button or wait for 8 seconds.
Slave Mode
Press the
MENU
button up to when the Slave Mode is showing on the display. Press
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the slave 1 or
25-
slave 2 mode. Once selected, press the
ENTER
button to store. Back to the main functions
without any change press the
MENU
button (or wait for 8 seconds to exit menu mode).
Sound State
Press the
MENU
button up to when the Sound State is showing on the display. Press
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the on (sound
control on) or off (sound control off) mode. Once selected, press the
ENTER
button to store.
Back to the main functions without any change press the
MENU
button (or wait for 8
seconds to exit menu mode).
Sound Sense
Press the
MENU
button up to when the Sound Sense is showing on the display. Press
ENTER
button and the display will blink. Use
DOWN
and
UP
button to adjust the sound
sensitively (1-100) of the unit. Once the value has been selected, press the
ENTER
button
to store. Back to the main functions without any change press the
MENU
button (or wait for
8 seconds to exit menu mode).
Black Out
Press the
MENU
button up to when the Black Out is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the yes (yes
blackout) or no (no blackout) mode. Once selected, press the
ENTER
button to store. Back
to the main functions without any change press the
MENU
button (or wait for 8 seconds to
exit menu mode).
Back Light
Press the
MENU
button up to when the Back Light is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the on (back
light on) or off (back light off 1 minute after auto show) mode. Once selected, press the
ENTER
button to store. Back to the main functions without any change press the
MENU
button (or wait for 8 seconds to exit menu mode).
Auto Test
Press the
MENU
button up to when the Auto Test is showing on the display. Pressing
ENTER
button and the display will show Test… and the unit will run self-test by built-in
program. To go back to the functions press the
MENU
button.
