24-
* Signal error while use DMX
*Check whether DMX cables be
connected well or not
* Check whether the DMX cable has to be
terminated with a terminator to reduce signal
errors. If not, please Solder a 120-ohm 1/4W
resistor between pin 2(DMX-) and pin 3(DMX+)
into a 3-pin XLR-plug and plug it in the
DMX-output of the last fixture
FOR ANY PROBLEM OR MALFUNCTION, PLEASE CONTACT YOUR RESELLER
Maintenance
The cleaning of internal must be carried out periodically to optimize light output.
Cleaning frequency depends on the environment in which the fixture operates:
damp, smoky or particularly dirty surrounding can cause greater accumulation of
dirt on the fixture’s optics.
●
Clean with soft cloth using normal glass cleaning fluid.
●
Always dry the parts carefully.
●
Clean the external optics at least every 20 days.
●
Clean the internal optics at least every 30/60 days
–
Up to vary products.
