Nicols BSW 10 R, User Manual

Page: 17 / 23

17
Auto Mode - The unit will automatically chase through the different colors and built-in programs.
Slave Mode – The unit will run under slave mode.
DMX control mode - This function will allow you to control each individual fixtures traits with a standard DMX 512 controller.
Sound control mode- When music play. The unit will work with music beat.
DMX Mode: Operating through a DMX controller give the user the freedom to create their own programs tailored to their own
individual needs. This function also allows you to use your fixtures as spot lights.
1.
This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller.
2.
The Beast 280 (Beam+Spot) has 16/24 two DMX channels to operate. Please see “DMX Values and Functions” for the DMX
traits.
3.
To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller. Set your desired
DMX address following the setup specifications that come with your DMX controller.
Hanging Drawing:
CAUTION!
Use an appropriate clamp to ring the fixture on the truss. Follow the instructions mentioned at the bottom of the base.
Make sure that the device is fixed properly! Ensure that the structure (truss) to which you are attaching the fixtures is secure.
Securing the fixture via one safety wire
Securing the fixture via two safety wires
Menu Map