16
5. Menu descriptions
1) DMX Address
Select the DMX Address menu, press the SETUP button. And then press the UP/DOWN button to set
initial address code
（
001 ~ 512
）
.
Once you have set initial address code, please press the SETUP button to save and go back to main
menu.
If you have not done anything for 30s, it will go back to main menu automatically.
2) Channel Mode
Select the Channel Mode menu, press the SETUP button. And then press the UP/DOWN button to
select channel mode.
Once you have set it well, please press the SETUP button to save and go back to the main menu.
If you have not done anything for 30s, it will go back to main menu automatically.
3) Auto Mode
Select the Auto Mode menu, there are two menus for option, one is Auto Mode, another is Scene
Edit with 7 scenes for editing. Each scene can be edited independently, and also includes all the
DMX channels function and time-keeping function, but no Reset function. If need less than 7 scenes,
then set the scene time-
keeping to “0”. The editing process is the same as Manual Control, exit to
save.
If you have not done anything for 30s, it will go back to main menu automatically.
4) Slave Mode
Select the Slave Mode menu, press the SETUP button to enter Slave Mode, then it will receive the
signal from the master and keep the same state as the master. The fixture in Auto Mode or Manual
mode is the master.
In the screensaver, it will switch to DMX mode in response to the channel sent from the console
whenever the master or slave receives the DMX512 signal.
5) Manual Control
Select the Manual Control menu, press the SETUP button to enter static color manual control mode.
And then press the UP/DOWN button to set relevant parameters.
Once you have set it well, please press the button to save and go back to the main menu.
If you have not done anything for 30s, it will go back to main menu automatically.
6) Settings
1: DMX Fail
Select DMX Fail menu, press the SETUP button. And then press the UP/DOWN button to
select settings: “OFF” (No DMX, lighting is off.), “HOLD” (No DMX, lighting keeps the original state).
Once you have set it well, please press the SETUP button to save and go back to the main menu.
If you have not done anything for 30s, it will go back to main menu automatically.
2: Display
Select Display menu, press the SETUP button. And then press the UP/DOWN button to select
settings: “Normal” or “Inverted”.
Once you have set it well, please press the SETUP button to save and go back to the main menu.
If you have not done anything for 30s, it will go back to main menu automatically.
If you have not done anything for 30s, it will go back to main menu automatically.
GP 200 Z IP
User manual
Summary of Contents for 3510360718264
Page 1: ...GP 200 Z IP Manuel d utilisation 1...
Page 10: ...GP 200 Z IP User manuel 10...
