1. Mount an electrical box
inside the wall
The S.T.I.C.K. controller can be installed in any standard
electrical backbox. If you use a double size box,
you can insert the power supply inside.
2. Connect the wires
POWER:
Connect a 5.5V or 6V DC 0.6A.
Be sure to not invert the + and the ground.
DMX
: Connect the DMX cable to the lighting
receivers (Leds, Dimmers, Fixtures..)
(for XLR: 1=ground 2=dmx- 3=dmx+)
3. Mount the interface on the wall
First, mount the back side of the interface on the wall with 2 or more screws
Secondly, plug the connectors :
- Ethernet cable
- DMX and power (connector block or RJ45)
Sunlite Touch-sensitive Intelligent Control Keypad
Ref. STICK-DE3
Page 2/4
Technical datasheet
Revision date 28 August 2012
www.nicolaudie.com
Version 1.0
EASY INSTALLATION
© Nicolaudie-Sunlite 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
POWER+DMX
WITH THE
CONNECTOR BLOCK
POWER+DMX
WITH THE
RJ45 CABLE
1 DMX +
2 DMX -
3 DMX2 +
4 POWER
5 DC +
6 DMX2 -
7 POWER
8 GROUND
POWER
+DMX
1.......8
(
(
POWER
DC +
POWER
Ground
DMX
Ground
DMX -
DMX +
