6)
Select the most suitable heat setting for your hair type
using the temperature increase (+) and decrease (-)
buttons. As with all products that reach salon high
temperatures, do not use your straightener too
frequently to avoid damaging your hair.
7)
The LED will flash for the temperature you have selected
while your straightener heats up. When the LED stops
flashing and stays lit, your straightener is ready to use.
8)
Separate a section of hair approximately 5cm in width
and smooth it out with a brush.
9)
Place the chosen section of hair between the plates of
your straightener and close the plates. Take care not to
touch the plates which are very hot with your fingertips.
Hold the straightener in place until the section of hair is
fully heated. This will be almost instantaneous.
10)
Once your hair is heated, carefully slide the plates in one
smooth movement all the way down to the ends of your
hair whilst holding it taut.
11)
Keep the section of hair smooth whilst you work in
order to avoid ridges and kinks.
12)
Switch off by pressing the off/temperature decrease
button for about 4 seconds and unplug your
straightener immediately after use. Always allow your
straightener to completely cool down on a heat proof
mat before storing.
Summary of Contents for NSS236
Page 14: ...Notes...
Page 15: ...Notes...