1)
Switch the appliance off, unplug from the mains, allow
to cool fully, and discharge any residual charge by
moving the Speed/Heat slider up to 2 then back to 0.
2)
Wipe over the casing using a soft damp cloth (if
necessary a very small amount of washing up liquid may
be used on the outer case only).
DO NOT
immerse the
unit in water or any liquid.
3)
DO NOT
use any harsh abrasives or cleaners as these
will damage the appliance.
4)
Your styler is fitter with a grille filter to prevent hair,
dust or fluff from getting inside your styler. It
MUST
be
kept clean or your styler is at risk of overheating.
If your styler overheats, it will stop working until the
safety device has cooled and reset itself.
Regularly clean the mesh with a soft brush or by gently
blowing into it.
NEVER ATTEMPT TO CLEAN THE GRILLE BY INSERTING
AN IMPLEMENT
If you have long hair or use large amounts of styling
products, clean the grille regularly i.e. once a month
Troubleshooting
Your styler will stop working if it has overheated. This may be
due to hair, dust or fluff blocking the grille.
1)
Unplug the styler.
2)
Allow it to cool completely.
3)
Clean the grille.
