Nickel-Electro Clifton Range SM-1 Manual Download Page 8

SPIROMETER SM-1
CLIFTON RANGE® - 1 YEAR WARRANTY 

2.  As medical grade oxygen is consumed and respiratory carbon dioxide is removed 

from expired breathe the volume falls progressively. The slope on the trace indi-

cates the rate at which oxygen is consumed. 

3.  Continue until half the oxygen has been used or for two minutes whichever occurs 

first.

4.  Draw a straight line linking the upper or lower extremities of the trace for the sec-

tion under examination. It is convenient if the lines extends over the length of the 

chart corresponding to one minute. Measure the vertical change in this time. This 

corresponds to the volume of oxygen consumed in one minute.  The investigation 

can be repeated during and after exercise and it is interesting to compare.

CARE AND MAINTENANCE 

  

Please ensure that the washing agent and sanitizing agent are BSI 

 

 

 

accredited and approved by the H&S department.

Outside Surfaces: Wipe with a soft cloth or sponge soaked in warm soapy water.

Inside Surfaces: Can be descaled to maintain in an as new condition. Descale by adding 

1 litre of vinegar to water and leave for an hour. Empty and brush the lime away. Rinse 

thoroughly afterwards. 

The stainless steel crevice free tank should provide years of valuable service and is 

resistant to chloride containing solutions but it is important to avoid high concentrations 

of halogens- particularly chloride. Halogen deposits may show as rust which can be 

cleaned off with nitric acid (10%) on a cloth. WEAR PROTECTIVE EQUIPMENT!

Bar Keepers Friend® can be used as a stainless steel cleanser to remove unsightly mineral 

deposits. 

EXTERIOR ANTI BACTERIAL PAINTED SURFACES

The spirometer should be cleaned at regular intervals by wiping external surfaces with 

a cloth or sponge soaked in warm water with a mild detergent. DO NOT USE STRONG 

SOLVENTS OR SOLUTIONS CONTAINING CHLORINATED HYDROCARBONS, ESTERS, 

KETONES OR ABRASIVE CLEANERS AS THIS MAY DAMAGE THE BUILT IN ANTI BACTERIAL 

PROPERTIES. 

The “anti-bacterial” paint finish inhibits the growth of bacteria. It has been tested by 

independant specialist houses using internationally recognised test methods and 

proven to be effective against a wide range if bacteria including Escherichia Coli and 

Staphylococcus Aureus (MRSA).  

!

Summary of Contents for Clifton Range SM-1






















Reviews: