INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
MACHINE
EDITION
Page
ASBC8S
27/10/09
5
INSTALLATION
Positioning
Install the machine on a stable surface, avoiding unstable trolleys, shelves
or tables.
The machine has a ventilation grille under the base. In order to
ensure a correct operation of the machine and prevent overheating, do not
obstruct this opening for any reason.
Do not place the machine on cloths, fabrics or paper surfaces that
could prevent the correct circulation of air.
Fig 2
Handling
Nicem's glass dryer is a bench-mounted machine and can therefore be moved manually only when the power plug
has been disconnected from the wall socket.
Assembling the brushes and air conveying manifold
The machine has eight brushes with the central two being smaller as compared to the others. To assemble the brushes,
insert one brush at a time into the corresponding slot and rotate it clockwise to fix it in place (coupled fixing).
Insert the air conveying manifold into the appropriate slot.
Before assembling the brushes and air conveying manifold, verify that the power plug has been
disconnected from the wall socket.
The machine should never be used or operated without the brushes and air conveying manifold mounted.
Electrical connections
The machine is equipped with a power cord and plug for connections to the user's mains.
Verify that the voltage and frequency of the power supply comply with the data on the machine data plate.
Make sure that the electrical system is able to support the required maximum load (Watt), also considering the other
appliances in use.
Connect the machine to a grounded wall socket.
The manufacturer is not liable to damages or injuries caused by failure to observe the abovementioned safety
regulations.
For information on how to replace the power cable, contact an authorized NICEM SpA service center.
