Niceboy VOICE HANDLE, User Manual

Page: 8 / 30

8
EN
INSTALLATION
1. Attach the table holder to the
side of the table with a screw
2. Insert the boom into the
opening on the table holder
3. Tighten the screw
4. Secure the required boom
position and tighten the
screw
5. Attach the microphone
stabiliser
6. Place the pop filter on the
boom
Recommendation: place the pop filter on the boom so that it is approximately 15 cm from the
microphone. The pop filter may also be placed on the edge of the table or in another suitable
place where there is room to attach the table holder.
CONNECTING TO A PC
You may connect the microphone directly to a PC with the audio connector (3.5 mm jack)
or with the supplied USB sound card. When using a USB sound card, both the microphone
(socket marked ‘microphone’) and external headphones (socket marked ‘headphones’)
may be connected. In this case, first connect the sound card to the USB on your PC (when
connection is made, it will be indicated by the flashing LED on the sound card), and then
connect the microphone and headphones. The Niceboy VOICE Handle microphone is Plug
& Play.
6
2
4
3
1
5