Niceboy PILOT Q9 RADAR, User Manual, Page: 26 / 108

26
Press the suction part (1) of the holder against the windshield
and lock the holder using the rotating mechanism (clockwise).
To remove the holder, turn the mechanism counter-clockwise.
Attach the camera to the holder using the mount (3) on the
top of the camera. You can adjust the tilt of the camera with
the screw (4). After setting the correct inclination, be sure to
tighten the screw sufficiently.
Notice: place the camera suction holder only on a windshield
that has been properly cleaned (degreased) and is completely
dry. You will achieve the best attachment results at temperatu-
res around 20°.
SPEED CAMERA ALERT FUNCTION
The speed camera alert function utilizes a database that is
part of the camera firmware. The current firmware version
with a radar database for possible update is located on the
website www.niceboy.eu in the support section. For the speed
camera alert function, it is necessary to have a cable with a
GPS module connected to the camera and the power supply
must be active at the same time. The speed camera warning
is accompanied by an acoustic prompt (the Acoustic Settings
fuction must be active) and graphical warning on the display (if
the display is switched on), provided the Speed Camera Alert
function is activated in the camera Menu: