60
Water tank
4. Fetch out the dust box firstly.
5. Open the seal button of the water tank, and inject cleaning water, and cover the sealing lid
and assemble the tank into robot.
6. Push the mopping assembly horizontally into the robot after matching the right snap joint
position.
Notes:
4. Fetch out the water tank before irrigation and do not irrigate the whole appliance.
5. Plug off and dry the robot before assembling the water tank and mop.
6. Do not break off the buckle of water tank in case of gracture.
Single suction & Roller brush
Press the buckle on the roller brush cover , then remove the roller brush cover and brush.
Push the single suction assembly into the groove after matching the buckle position.
6. Roller brush cover
7. Buckle
8. Roller brush
9. Roller brush groove
10. Single suction assembly
1
2
3
4
5
