Nice XBA7-XBA8, Instruction And Warnings For The Installer

Page: 5 / 72

EN
English - 3
turer is not liable for damage resulting from the improper use of the product,
other than the one specified in this manual.
3 – OPERATION
XBA7 is an indicator light that uses white LEDs . It can be used as a flashing signaller or
a courtesy light, depending on the settings in the control unit that XBA7 is connected to.
The product is equipped with orange filters for use as a flashing signaller.
XBA8 (for MBAR/LBAR only) is an indicator light that uses red and green LEDs; its oper-
ation is managed by the control unit it is connected to. It can work in two modes by
changing the jumpers:
Possible configurations and operating modes:
• configuration 1 (factory setting), see fig. 1 : for this mode the function “One-way traffic
light” or “Red traffic light” or “Green traffic light” must be active on the control unit ( fig. 2/3 ).
• configuration 2 see fig. 4 : with this mode, the function “Two-way traffic light” only can
be programmed ( fig. 5 ).
For more information on the operating modes of the two configurations, refer to the
Oview function datasheets on the website www.nice-service.com, in the “download”
section.
Important warnings
Attention!
– Before changing the position of the jumpers, disconnect the mains power.