background image

– ENGLISH

ENGLISH

Translation of the original instructions in full

CONTENTS

GENERAL SAFETY WARNINGS AND 
PRECAUTIONS

1

 

GENERAL SAFETY WARNINGS AND PRECAUTIONS

CAUTION! – This manual contains important instruc-
tions and warnings for personal safety. Carefully read 
all parts of this manual. If in doubt, suspend installa-
tion immediately and contact the Nice Technical As-
sistance.

CAUTION! – Important instructions: keep this manual 
in a safe place to enable future product maintenance 
and disposal procedures.

 

The product packing materials must be disposed of in com-
pliance with local regulations.

 

Never apply modifications to any part of the device. Oper

-

ations other than those specified may only cause malfunc

-

tions. The manufacturer declines all liability for damage 

caused by makeshift modifications to the product.

 

Never place the device near to sources of heat and never 

expose  to  naked  flames.  These  actions  may  damage  the 

product and cause malfunctions.

 

This product is not intended for use by people (including chil-
dren) with reduced physical, sensory or mental capabilities or 
who lack experience and knowledge, unless they have been 
given supervision or instruction concerning the use of the 
product by a person responsible for their safety.

 

Make sure that children do not play with the product.

 

Handle the product with care, being sure not to crush, knock 
or drop it in order to avoid damage.

 

The batteries must be removed from the appliance prior to 
its disposal.

 

The batteries must be disposed of in a safe way.

 

The manufacturer of this appliance, Nice S.p.A., hereby de-
clares that the product complies with Directive 2014/53/EU.

 

The instruction manual and the full text of the EU Declaration 
of Conformity are available at the following Internet address: 
www.niceforyou.com, under the “support” and “download” 
sections.

 

For transmitters: 433 MHz: ERP < 10 dBm.

GENERAL SAFETY WARNINGS AND PRECAUTIONS  . . . . . 2

PRODUCT DESCRIPTION AND INTENDED USE  . . . . . . . . . 3

2.1  List of constituent parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
2.2  Transmitter functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

MEMORISING THE TRANSMITTER . . . . . . . . . . . . . . . . . . . . 4

3.1  Transmitter verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
3.2  Memorising the transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

3.2.1  Memorisation in “Mode 1” . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
3.2.2  Memorisation in “Mode 2” . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
3.2.3  Memorisation in “Extended Mode 2” . . . . . . . . . . . . . . . . . . .  4
3.2.4  Memorisation through the “ENABLING Code” (between an 

OLD transmitter already memorised and a NEW transmitter) .  4

STATUS REQUEST PROCEDURE. . . . . . . . . . . . . . . . . . . . . . 5

ENCODING SWITCH PROCEDURE  . . . . . . . . . . . . . . . . . . . . 5

DELETION PROCEDURE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

REPLACING THE BATTERY  . . . . . . . . . . . . . . . . . . . . . . . . . . 5

PRODUCT DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

8.1  Battery disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . 6

10 CONFORMITY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

10.1  SIMPLIFIED EU DECLARATION OF CONFORMITY  . . . . . . . . . .  6
10.2  COMPLIANCE WITH THE FCC RULES (PART 15) AND WITH 

RSS-210 RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

11 ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

11.1  String for keyring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
11.2  FASTENING SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

Summary of Contents for MYGO2BD









Reviews: