ENGLISH_
65
EN
DETECTION OF EVENT IN THE INPUTS
DETECTION TIME OF INPUT SIGNAL
Command:
#TDXXYYY
XX - - Input number
YYY - Time
Function:
:
It enables you to determine the minimum tine of continuous
stay of signal in the input, for detection of an event.
Parameter:
Number of input ranging from 01 to 02, detection time from
000 (immediate or pulse) to 999 seconds (time greater than zero).
• For the setting using a number already registered
Example 1:
For setting of the detection time of event in the input 1,
immediate or pulse:
#TD01000
Example 2:
For setting the detection time of signal in the input 1, with
10-second retention detection applying input signal, send the following
command:
#TD01010
• For setting using the password
Exemplo 1:
For setting of the detection time of event in the input 1,
immediate or pulse, sample password 0000:
?0000#TD01000
Exemplo 2:
For the setting of the detection time of signal in the input 1,
with 10-second retention detection applying input signal, sample password
0000:
?0000#TD01010
NOTE: It should be pointed out that this setting can be carried out using
password at the beginning of the command, or omitting the password in
case its number is already registered.
FUNCTIONS OF THE INPUTS
6
