background image

4

General

Buffer tanks

UKV 20-40, UKV 20-100

Chapter 1 | 

1 General

Introduction

Thank you for your confi dence and choice of equip-

ment by NIBE. To fully benefi t from the advantages of 

this product, please read this Manual before using it, 

and in particular chapters relating to the application, 

installation and maintenance, and warranty. Please 

keep this Manual in a safe place for future reference.

 Intended Use

Buffer tanks are used for storage and transfer of ener-

gy contained in the heating medium. The main task of 

the buffer tanks with capacities of 40 L and 100 L is 

to increase capacity of the heating circuit. In addition, 

the 100 L tank is a hydraulic coupler is in the heating 

system. The accumulated energy is transferred to the 

heating system. Buffer tanks can operate with a va-

riety of heat sources in central heating systems such 

as heat pumps, solid fuel boilers, solar heating sys-

tems, etc.When used in the system containing a solid 

fuel-fi red  boiler,  the  low  capacity  tank  improves  the 

uniform heat removal. It reduces the amount of fi re 

ups and additionally enables the boiler operation at 

the design power rating. This also enhances the effi -

ciency and life of the boiler. 

When operating with a heat pump, the buffer tank task 

is to increase the capacity of the heating system. The 

use of buffer limits the number of compressor star-

t-ups, which extends its life. NIBE buffer tanks ena-

ble operation with virtually any type of central heating 

system. During the installation and operation, always 

follow the instructions in this Manual.

Fig. 1 

UKV 20-40 buffer tank.

Fig. 2 

UKV 20-100 buffer tank.

Sections of the Manual relating to the instal-

lation, inspection and maintenance are inten-

ded for the qualifi ed installer.

CAUTION

The manufacturer shall not be held liable for 

any damages caused by failure to comply 

with the recommendations and observations 

contained in this Manual.

CAUTION

Buffer tanks are designed for heating up and 

supplying  the  heating  medium.  Any  inap-

propriate use, not in compliance with its 

intended  use  is  not  permitted.  Neither  ma-

nufacturer nor supplier shall be responsible 

for damages resulting from this.

CAUTION

Summary of Contents for UKV 20-100













Reviews: