Nibe SOLAR 42, Installer Manual, Page: 20 / 44

Program settings
Program setting of SOLAR 42 can be performed via the
start guide or directly in the menu system.
Caution
Also see the Installer manual for
F1145/F1155/F1345/SMO 40.
Start guide
The start guide appears upon first start-up after heat
pump installation, but is also found in menu 5.7.
Menu system
If you do not make all settings via the start guide or
need to change any of the settings, this can be done
in the menu system.
Menu 5.2 - system settings
1)
Activating/deactivating of accessories.
Select: solar heating
1) Applies to NIBE F1145/F1155.
Menu 5.2.4 - accessories 2)
Activating/deactivating of accessories.
Select: solar heating
2) Applies to NIBE F1345/SMO 40.
Menu 5.3.4 - solar heating
Settings for solar heating.
Menu 5.6 - forced control
Forced control of the different components in the heat
pump as well as in the different accessories that may
be connected.
EP30-AA5-K1: Activating the circulation pump (GP4).
EP30-AA5-K2: Activating solar panel cooling.
EP30-AA5-K3: Signal to three way valve (QN23).
EP30-AA5-K4: No function.
20
GB