Detailed information about the accessories and complete
accessories list available at
.
Not all accessories are available on all markets.
DOCKING KIT PVT 40
PVT 40 enables S1155PC to use PVT-panels as brine-source.
Part no. 057 245
DOCKING KIT SOLAR 40
Solar 40 means that S1155PC (together with VPAS) can be connec-
ted to thermal solar heating.
Part no 067 084
DOCKING KIT SOLAR 42
Part no 067 153
EXTERNAL ELECTRIC ADDITIONAL HEAT ELK
These accessories require accessories card AXC 40 (step controlled
addition).
ELK 26
26 kW, 3 x 400 V
Part no. 067 074
ELK 15
15 kW, 3 x 400 V
Part no. 069 022
ELK 213
7–13 kW, 3 x 400 V
Part no. 069 500
ELK 42
42 kW, 3 x 400 V
Part no. 067 075
EXTRA SHUNT GROUP ECS 40/ECS 41
This accessory is used when S1155PC is installed in houses with
two or more different heating systems that require different supply
temperatures.
ECS 41 (approx.
80-250 m²)
Part no 067 288
ECS 40 (Max 80 m²)
Part no 067 287
HUMIDITY SENSOR HTS 40
This accessory is used to show and regulate humidity and temper-
atures during both heating and cooling operation.
Part no. 067 538
EXHAUST AIR MODULE FLM S45
FLM S45 is an exhaust air module designed to combine recovery
of mechanical exhaust air with ground source heating.
Bracket BAU 40
Part no. 067 666
FLM S45
Part no. 067 627
HRV UNIT ERS
This accessory is used to supply the accommodation with
energy that has been recovered from the ventilation air. The
unit ventilates the house and heats the supply air as neces-
sary.
ERS 20-250
Part no. 066 068
ERS S10-400
1
Part no. 066 163
ERS 30-400
Part no. 066 165
1 A preheater may be required.
BASE EXTENSION EF 45
This accessory is used to create a larger connection area under
S1155PC.
Part no. 067 152
AUXILIARY RELAY HR 10
Auxiliary relay HR 10 is used to control external 1 to 3 phase loads
such as oil burners, immersion heaters and pumps.
Part no 067 309
COMMUNICATION MODULE FOR SOLAR
ELECTRICITY EME 20
EME 20 is used to enable communication and control between in-
verters for solar cells from NIBE and S1155PC.
Part no. 057 188
LEVEL MONITOR NV 10
Level monitor for extended checks of the brine level.
Part no. 089 315
POOL HEATING POOL 40
POOL 40 is used to enable pool heating with S1155PC.
Max. 17 kW.
Part no 067 062
FILLING VALVE KIT, BRINE 25/32
Valve kit for filling brine in the collector hose. Includes particle filter
and insulation.
KB 32 (max. 30 kW)
Part no. 089 971
KB 25 (max. 12 kW)
Part no. 089 368
ROOM UNIT RMU S40
The room unit is an accessory with a built-in room sensor, which
allows the control and monitoring of S1155PC to be carried out in
a different part of your home to where it is located.
Part no. 067 650
NIBE S1155PC
Chapter 12 | Accessories
64
Accessories