Nibe GSU 30, Installer Manual

Page: 4 / 12

General
This accessory is used for the installation of NIBE F2040
on the ground.
CONTENTS
4 x legs 2 x top parts
2 x stays
2 x stays
4 x vibration dampers
M8 – M12
4 x adjustable feet (M12)
4 x nuts M8 4 x washers Ø 8.4 mm
28 x screws M5x10 Tx25
Assembly
ASSEMBLY
TIP
For more information about set-up, see the
main product’s Installer Manual.
Position GSU 30 outdoors on a firm and level surface
that can take the total weight of the ground stand and
F2040. Ideally, use a concrete foundation. If concrete
slabs are used, these should lie on tarmac or gravel.
The concrete foundation or slabs must be positioned so
that the lower edge of F2040 is at the level of the aver-
age local snow depth, although at least 300 mm.
LEK
300 mm
Do not place GSU 30 and F2040 directly on a lawn or
other soft surface.
Technical data
TECHNICAL SPECIFICATIONS
GSU 30
924 – 1 076 mm Width
400 – 450 mm Height
438 mm Depth
5,5 kg Weight
067 653 Part No.
GSU 30 | GB 4
English