Nibe EF 45, Installer Manual, Page: 4 / 8

General
This accessory can be used to create a larger connection
area under the heat pump.
NOTE
This accessory is intended for products with a
max weight (during operation, static load) of
500 kg and c/c measurement between the feet
according to the following dimension diagram.
Be careful when placing the product because
some load variation can occur.
Caution
This accessory raises the centre of gravity of
the product.
COMPATIBLE PRODUCTS
• F470 • F370
• F750 • F730
• F1226 • F1126
• F1245 • F1145
• F1255 • F1155
• F1355 • F1345
• S1255 • S1155
• VVM 320 • VVM 310
• VVM 325 • VVM 225
• VVM S325 • VVM S320
CONTENTS
Raised base 1 x
Cover plate 1 x
Feet 4 x
Mounting
1. Install the supplied feet on EF 45.
2. Position EF 45 on a fixed foundation that tolerates
the weight of the product.
3. Adjust feet to obtain a horizontal and stable set-up.
4. Install the product on top of EF 45.
5.
Install the magnetic cover.
LEK
Dimensions
The dimensions drawing can be found at the end of this
Installer Manual.
EF 45 | GB 4
English