- 8 -
2.2
ELECTRICAL INSTALLATION
2.2.1
BASIC INFORMATION FOR ELECTRICAL INSTALLATION
Run the supply cord through the bushing and connect accordingly with the scheme for the
heating unit. Run the control cable through the gland and connect according to the diagram
(Figure 4). The heating unit is connected to the 400 V (230 V)/50 Hz mains by a fixed connection
with a conductor of the appropriate cross-section and the appropriate fuse for the power rating
of the heating element.
Notice:
Perform the installation in compliance with applicable standards.
2.2.2
WIRING DIAGRAM
Figure 4
