Nibe Contura Connect, Manual

Page: 8 / 16

GB
24
7
6
5
4
3
2
1
3 Connection of WiFi device to the Internet
1. Communication cable connection
2. Power supply connection
3. POWER
Green LED: Shows that the WiFi device is connected to a power supply.
4. SERVER REMOTO Orange LED: Shows that it is connected to a WiFi network.
5. ACCESS POINT Orange LED: Configuration and activation status for ACCESS POINT. Blinking
LED during start-up. Solid light during configuration and activation.
6. INTERNET
Orange LED: Solid light connected to a WiFi network. Blinking LED trying to connect
to a WiFi network
7. RESET Resetting WiFi device and activation of configuration status
Connection of WiFi device to the Internet can be done without connection to the stove,
in which case the power adapter must be connected. The communication cable does
not need to be connected. After connection to the Internet, connect the WiFi device to
the stove (see the section “Connection to stove”).
• Check that a wireless network is available.
• Check that the green LED (POWER) is lit.
• When power is turned on, the orange LED (ACCESS POINT) will blink for about 5 seconds and
then turn solid. If it continues to blink, hold the Reset button down for a few seconds.
• A WiFi device needs a PC/tablet/smartphone and must be connected to the wireless network.
Connect a PC/tablet/smartphone to the wireless network PLT-WIFI_XXXXXXXXXXXX that the
WiFi device creates.