DIP SWITCH
The DIP switch (S2) on the accessory board must be
set as follows.
ON
1
2
3
4
5
6
7
8
Program settings
Program setting of AXC 20 can be performed via the
start guide or directly in the menu system.
START GUIDE
The start guide appears upon first start-up after heat
pump installation, but is also found in menu 5.7.
MENU SYSTEM
If you do not make all settings via the start guide or need
to change any of the settings, this can be done in the
menu system.
MENU 5.2 - SYSTEM SETTINGS
Activating/deactivating of accessories.
Select: "
extended functions for EAHP
".
MENU 4.9.2 - AUTO MODE SETTING
For example, you can perform the following settings for
BSA 10 here.
• filtreringstid
• stop preheating of supply air
• stopp av tillsats
• stopp av värme
MENU 2.9.2 - HOT WATER RECIRC.
Here you can make the following settings for hot water
circulation for up to three periods per day:
• How long the hot water circulation pump must run
per operating instance
• How long the hot water circulation pump must be
stationary between operating instances.
Technical
specifications
AXC 20
175x250x100
(mm)
External; dimensions
(LxWxH)
067 609
Part No.
15
AXC 20 | GB