Program settings
Program setting of ACS 310 can be performed via the
start guide or directly in the menu system.
Start guide
The start guide appears upon first start-up after heat
pump installation, but is also found in menu 5.7.
Menu system
If you do not make all settings via the start guide or need
to change any of the settings, this can be done in the
menu system.
Menu 1.9.5 - Cooling settings
Menu 4.2 - “Operating mode”
Choose between different operating modes.
Menu 4.9.2 - Auto mode settings
Here you can set the temperatures, which control when
heating and cooling, respectively, are to be active in
AUTO operating mode
Menu 5.2 -system settings
Activating/deactivating of accessories.
Caution
Also see the Installer manual for the indoor
module.
Technical data
Technical specifications
ACS 310
230V ~ 50 Hz
Voltage circulation pump
230V ~ 50 Hz
Voltage reversing valve
G1
Connection, pump
G1 x Ø 22 mm
compression
ring
Connection, ball valve
7,5
cw
s
value reversing valve
067 248
Part No.
Pump capacity diagram
Available pressure circulation pump, GP1
Pressure (kPa)
Flow (l/h)
0
0
200
400
600
800 1000 1200 1400 1600
2000
20
30
40
50
60
70
80
Tryck
(kPa)
Flöde
(l/h)
10
1800
ACS 310 | GB
18
